Black & Decker BLP14750TDC - Manuel (Page 4)

6
5
BLENDER JAR ASSEMBLY
1. After unpacking the blender, before first use, wash all parts except the unit
base.
2. Put the gasket on top of the blade assembly.
3. Place the blade assembly into the jar base and turn the jar
base clockwise until tight (B).
4. Interlock System: Place the assembled jar onto the unit
base and turn toward the lock symbol ( ) until secured
in place. You have engaged the interlock system if you lift
the jar handle and the entire blender lifts together as one
unit.
How to Use
This product is for household use only.
• Remember to press one button at a time.
• The unit has a device that automatically shuts off the unit after 2 minutes for
speeds 1 to 14 and after 20 seconds for the pulse function. If this occurs, the
Power LED starts blinking, unplug the unit and wait 30 seconds.
• Plug in the unit. If the LED continues to blink, stop using the unit and contact
the service center for instructions.
• The unit has an intelligent fuse system that automatically shuts off the motor to
protect it from overheating. Wait 5 minutes for unit to cool down. Unplug the
unit then plug again to resume operation.
1. Make sure the unit is OFF and plug the cord into a standard electrical outlet.
2. Place the food into the jar and the lid on the jar before blending.
3. Make sure that the lid cap is in place.
Note: When crushing hard foods, keep one hand on the lid.
4. Choose the speed that best suits your task for food or
beverage blending (C).
5. When finished blending, press the On/Off button.
6. For quick or delicate blending tasks use the Pulse button
for a few seconds, then release. Releasing the Pulse button
automatically turns off the blender.
7. To add ingredients while the blender is on, remove the lid
cap and drop ingredients through the lid opening.
8. To remove the jar, grasp the handle, twist toward the unlock symbol ( ) and
lift it from the unit base.
9. Remove the lid before pouring.
BLENDING TIPS AND TECHNIQUES
• Cut food into small pieces 3/4” (2 cm) before adding to the blender.
• When ingredients stick or spatter along the sides of the jar, stop the blending
action and remove the lid. Use a rubber spatula to push food toward the blades.
Replace the lid, then continue blending.
• Some of the tasks that cannot be performed efficiently with a blender are:
beating egg whites, whipping cream, mashing potatoes, mixing dough, and
extracting juices from fruits and vegetables.
• The following items should never be placed in the unit as they may cause
damage: dried spices and herbs (ground alone), bones, large pieces of solidly
frozen foods, tough foods such as turnips.
• Use the lid cap to measure ingredients up to 60 ml (2 oz.) when adding
ingredients like lemon juice, cream, or liqueurs.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING
1. Before cleaning, turn off and unplug the unit. Twist to unlock (
), lift the jar
off the unit base, and rinse. For easier cleanup, rinse parts immediately after
blending. Parts may be hand-washed.
2. Do not immerse the base in liquid. Wipe the unit base with a damp cloth and
dry thoroughly. Remove stubborn spots by rubbing with a damp cloth and
nonabrasive cleaner.
Note: If liquids spill into the base, wipe with a damp cloth and dry thoroughly.
Do not use rough scouring pads or cleansers on parts or finish.
3. Removable parts can be washed by hand or in a dishwasher. Lid, lid cap, and
blade assembly should be placed in the top rack only. The jar is bottom rack
dishwasher-safe. Do not place jar or parts in boiling liquids.
B
C