Daily use, 1 using the detergent, 2 setting and starting a programme – AEG F65710IM0P Manuel d'utilisation

Page 32: The auto off function, Starting a programme, Starting a programme with delay start

Advertising
background image

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in user

mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent. If you use multi-

tablets, activate the option Multitab.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1. Close the appliance door.

2. Press the on/off button to activate

the appliance. Make sure that the

appliance is in programme selection

mode.

3. Press Program again and again until

the indicator of the programme you

want to select comes on.

The display shows the programme

duration.

4. Set the applicable options.

5. Press Start to start the programme.

• The indicator of the running

phase comes on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

3. Press Start to start the countdown.

• The delay indicator comes on to

confirm the start of the

countdown.

• The countdown starts to decrease

with steps of 1 hour. Only the last

hour will decrease with steps of 1

minute.

When the countdown is completed, the

programme starts and the indicator of

www.aeg.com

32

Advertising