AEG S86090XVX1 - Manuel (Page 30)

UK - 28 -
Freezer
compartment not
cold enough This caution w ill be seen
especially after long term of
pow er failure
1. Do not freeze the foods that are thaw
and use in short time period.
2. Set the freezer temperature to colder
values or set the super freeze, until the
compartment gets to normal temperature.
Do not put fresh food until this failure is off.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
Refrigerator
compartment not
cold enough
Ideal temperature for
Refrigerator Compartment is
+4C°. lf you see this w arning
your foods have risk of
spoiling.
1. Set the refrigerator temperature to colder
values or set the super cooling mode until
the compartment gets to normal
temperature.
2. Do not open the door much until this
failure is off.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
Not cold enough
It is the combination of
Freezer / Refrigerator's not
cold enough error type
Check freezer / refrigerator's not cold
enough conditions.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
Freezer
compartment too
cold The foods starts to freeze
because of the too much
cold temperature
1. Check if the "Super cooling mode" is on.
2. Decrease the refrigerator temperature
values.
Note: You can push "Ok" button to stop the
alarm functions. The buzzer w ill stop, alarm
and refrigerator symbols w on't blink. But
the screen w ill stay red until the problem is
solved. When the problem is solved it w ill
turn to w hite.
1. If the screen's color
changes to red and
show s "LO PO"
2. If alarm symbol blinks
Low voltage
When the pow er supply gets
low er than 170V the
appliance gets to steady
position
This is not a failure. This prevents any
damages on the compressor. This w arning
w ill be off after the voltage gets required
level.
Note: You can push "Ok" button to stop the
alarm function. The screen stays red and
show s "LO PO" until the voltage gets
required level.
1. If the temperature
values of refrigerator and
freezer compartments are
on the screen
2. If alarm and refrigerator
symbols blink
3. If user hears the
buzzer sound
4. If the screen's color
changes to red color
PDF created with pdfFactory Pro trial version www.pdffactory.com