Figure a.1: avriq status dialog box, Upgrading the avriq module firmware – Avocent 1415 Manuel d'utilisation
Page 56
46 AutoView 1415/1515/2015 Switch Installer/User Guide
•
In the selected COM port Advanced Port settings, verify that the FIFO buffers are selected and
that the receive buffer is set to High.
CAUTION: While upgrading, do not use your server for anything else or switch between windows. Close all other
windows if necessary. If the upgrade was unsuccessful (such as during a power outage), repeat the procedure.
Upgrading the AVRIQ module firmware
The AVRIQ modules can be upgraded individually or simultaneously.
NOTE: IAC modules are not upgradable.
To simultaneously upgrade multiple AVRIQ modules:
1.
Press
Print Screen
. The Main dialog box will appear.
2.
Click Commands - AVRIQ Status. The AVRIQ Status dialog box displays.
Figure A.1: AVRIQ Status Dialog Box
NOTE: You can automatically upgrade any AVRIQ module connected to your AutoView switch by selecting the
Auto-upgrade
box in the AVRIQ Status dialog box.
3.
Click one or more types of modules to upgrade. Click Upgrade.
4.
The AVRIQ Upgrade dialog box displays. Click OK to initiate the upgrade and return to the
AVRIQ Status dialog box.