Bonavita BV382518V - Manuel (Page 6)

you turn on the kettle. No need to set it every time
unless you want to change shut off temperature.
Note: During the heating cycle the LED display
shows the current water temperature.
Note: After set temperature is reached the heater
will shut off but the display will continue to show
water temperature for up to 1 hour when the kettle
is on the base.
Before plugging the kettle into the wall outlet, check
that the electrical circuit is not overloaded with other
appliances.
Note: To manually interrupt the boiling process,
press the on/of button at any time, heater and LED
lights will shut off.
4) Selecting Water Temperature Hold:
• This feature allows the kettle to reach and maintain
water at a set temperature for up to one hour. This is
an optional setting.
• First, select temperature set point as described in
section 3.
• Press the hold
button and the
hold indicator LED
will light (ill. F).
• When set
temperature
is reached the
heater will turn
heating off and
on as needed to
maintain set temperature. The power on indicator
light is on and the LED displays the current water
temperature.
• When you lift the kettle to pour and return to the
base press the hold button to continue the hold
temperature function.
High Altitude Users
At higher elevations water boils at lower tem-
peratures. Use the graph below to set your kettle
temperature.
Count Up Timer Feature
Note: When you lift the kettle, the LED display will
display the count-up timer. The first number indicator
is minutes, and the last two number indicators are
seconds (the maximum count time is 7 minutes).
Press the + button to start the timer. Set the kettle
back on the base and lift back off to reset timer to
zero.
WARNING: The appliance is very hot during use. Do
not touch kettle surface. Danger of burns!
Note: If kettle is removed from base during a heating
cycle the heating cycle and power on indicator light
shut off. The LED will display “000”. When the kettle
is returned to base the display will show current
water temperature for 7 minutes and then turn off.
Using the kettle