Amana W10326797A - Manuel (Page 7)

7
Adjust the Door
1. Locate the two front leveling legs taped among the packing
materials.
2. Screw these legs into the front holes on the bottom of the
freezer. The back of the freezer rests on two fixed supports.
3. Adjust the front legs enough to lift the cabinet up off of the
floor.
NOTE: If your model is equipped with rollers, the front legs
should be lowered enough to lift the rollers off of the floor to
ensure the freezer does not roll forward when the door is
opened.
A. Cabinet Hinge Hole Plugs
A
5
Door Handle
Seal Screw
Door Swing Reversal (optional) Door Removal &
Replacement
Top Hinge
Bottom Hinge
A. Top Hinge Cover
B.
3 /
8
" Hex-Head Hinge Screws
C. Top Hinge
A
B
C
Base Grille
2
C. Hinge Pin
A. Door Stop Screws
B. Door Stop
E. 5 /
8
" Hex-Head Hinge Screws
D. Hinge Pin Nut
C
D
E
A
B
1A
1B
1C
4
Right Hand Hinge
Door Stop
Left Hand Hinge
Door Stop
A. Door Stop Screws
B. Door Stop
C. Hinge Pin
E. 5 / 8 " Hex-Head Hinge
Screws
D. Hinge Pin Nut
C
D
E
A
B 3
A. Handle Trim
B. Handle Screws
C. Handle
1-1
Handle
C
B
A
A
B