Sony PCG-F520 - Manuel (Page 61)

Connecting a Digital Video Camera Recorder #
Connecting a Digital Video Camera Recorder
You can connect an i.LINK-enabled digital video camera recorder to
the S400 i.LINK
(IEEE1394) connector.
To connect a digital video camera recorder
❑
Plug one end of the i.LINK cable (not supplied) into the i.LINK connector
on the left side of the computer and the other end into the DV In/Out
connector on the digital video camera recorder.
The Sony digital video camera recorder is pictured; you may need to connect your
camera differently.
On Sony digital video cameras, connectors labeled “DV In/Out” or “i.LINK” are i.LINK-
compatible.
See the manual that came with your digital video camera recorder for more
information on installation and use.
Do not connect more than one digital video camera at a time. The software supplied
with your computer will not recognize multiple cameras.
The i.LINK connector on the computer does not supply power to external devices. If the
external device requires power from the i.LINK connector, you cannot use the device
with the computer.
The computer supports transfer rates up to 400 Mbps; however, the actual transfer rate
is the lowest transfer rate of the slowest external device connected to your computer.
The i.LINK features available may vary depending on the software applications you use.
See the documentation that came with your software for more information.
Digital video
camera recorder
i.LINK cable
to i.LINK
to DV In/Out
(not supplied)