Sony SCD-C2000ESB - Manuel (Page 14)

14 US
You can locate a particular point in a track
during play or play pause.
Tip
When “OVER” appears in the display, the disc has
reached its end. Press and hold m to go back.
Note
Tracks that are only a few seconds long may be too
short for monitoring. In this case, the player may not
search correctly.
You can play an entire disc or a specific track
repeatedly. This function can be used with
1DISC Shuffle Play to repeat all the tracks in
random order (page 15), or with Program Play to
repeat all the tracks in a program (page 15).
Press REPEAT on the remote repeatedly
until “REP” or “REP1” appears in the
display.
REP: For all the tracks on the disc(s).
REP1:For a single track only.
When “REP” is selected, Repeat Play changes
according to the selected play mode.
To cancel Repeat Play
Press REPEAT on the remote repeatedly until
both “REP” and “REP1” disappear.
Notes
• Repeat All Play cannot be used with ALL DISCS
Shuffle Play.
• Repeat All Play stops automatically after all the
tracks have been repeated five times.
• If you turn off the player or disconnect the power
cord, Repeat Play is canceled.
Locating a Particular
Point in a Track
Locating a point Do the following:
While monitoring the
sound (Search) Press and hold m/M
during play.
By observing the
time indication
(High-Speed Search) Press and hold m/M
during play pause.
By setting the start
time (Time Search) 1 Turn l AMS L (or
press ./> on the
remote repeatedly) in stop
mode to select the desired
track.
2 Press and hold m/M to
set the time to start play
while looking at the display,
then press N.
Playing Tracks
Repeatedly
— Repeat Play
When the play
mode is The player repeats
ALL DISCS
Continuous Play
(page 9) All the tracks on all the discs in
sequential order.
1DISC
Continuous Play
(page 9) All the tracks on the current disc in
sequential order.
1DISC Shuffle
Play (page 15) All the tracks on the current disc in
random order.
Program Play
(page 15) All the tracks in the program in
sequential order.