Removing the unit, Specifications, Removing the unit specifications – Sony CDX-R30M Manuel d'utilisation

Page 15

Advertising
background image

15

CDX-R3310/R30M

2-515-510-11 (1)

H:\Data Disk\2515510111\251551011CDXR3310SU\01US02CD-U.fm

masterpage:Right

H:\Data Disk\2515510111\251551011CDXR3310SU\01US02CD-U.fm

masterpage:Right

Fuse replacement

When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse
blows, check the power
connection and replace the
fuse. If the fuse blows again
after replacement, there may
be an internal malfunction. In
such a case, consult your
nearest Sony dealer.

Cleaning the connectors

The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 4) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.

Notes
For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition
switch.

Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1

Remove the protection collar.

1

Detach the front panel (page 4).

2

Engage the release keys together with the
protection collar.

3

Pull out the release keys to remove the
protection collar.

2

Remove the unit.

1

Insert both release keys simultaneously
until they click.

2

Pull the release keys to unseat the unit.

3

Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit

WARNING

Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.

Fuse (10A)

Main unit

Back of the front panel

Orient the release
keys as shown.

continue to next page

t

Hook facing
inwards.

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
23.2 watts per channel minimum continuous
average power into 4 ohms, 4 channels driven
from 20 Hz to 20 kHz with no more than 5% total
harmonic distortion.

CEA2006 Standard
Power Output: 17 Watts RMS

× 4 at

4 Ohms < 1% THD+N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)

Advertising