Sony PCV-RX740 - Manuel (Page 51)

Upgrading and Maintaining Components 37
9 Press down firmly and evenly at both corners until the module is
fully seated.
10 Replace the power supply (see “Replacing the Power Supply” on
page 46).
11
Replace the side panel (see “Replacing the Side Panel” on page 25).
12
Reconnect the power cord and turn on the computer.
Your computer automatically recognizes the extra memory and will
configure itself accordingly when you turn on the computer. No further
action is required.
✍
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.