Sony PCG-Z505JE - Manuel (Page 61)

Connecting the i.LINK® Port Replicator "'
3
Fold the port replicator cable into the compartment on the side of the
port replicator.
Connecting a Printer
You can use the port replicator to connect a Windows 98 or Windows 2000
compatible printer or other parallel port device to your computer.
To Connect a Printer
❑ Use the symbol to locate the Printer connector on the port
replicator. Plug the printer cable (supplied with the printer) into this
connector.
❑ You can connect a Windows 98 or Windows 2000 compatible USB
printer to your computer. Use the
symbol to locate the USB port
on your computer and printer. Plug the USB printer cable (optional)
into the USB connector
✍
You cannot use the optional PCGA-PR5 port replicator with your computer.
When you use the port replicator, your computer’s mini USB connector does not work.
✍
Turn off the computer before connecting peripherals. In normal use, you should turn on the
peripherals before turning on the computer. You can connect i.LINK devices while the
computer is on.
Connect the AC adapter only after connecting all cables.
Printer
Power cord
to
Printer
to your computer
Printer
Power cord
Printer cable
(supplied with the printer)
to your computer