Acoustic Research HT60 - Manuel (Page 47)

WHT24
page 5
Installing the Adjustable Spike Feet
1. Turn the receiver over, being careful not to scratch the top surface.
2. Turn hex nut to adjust spiked foot to desired height.
3. Insert threaded spike foot into one of the specified holes in the base of the
receiver.
4. Turn the spike foot clockwise until tightened. Repeat for second receiver.
5. Turn receiver over and place spike feet inside flat metal holders, if desired.
FIGURE 2 - Installing the Adjustable Spike Feet
L R
D C I N D C I N
ON OFF ON OFF
LINK
AUDIO
OFF
FIGURE 3 - Adjustable Spike Feet Installed