Personalisation, Setting the temperature, Setting the spin speed – Indesit XWC-71252-W-FR Manuel d'utilisation

Page 21: Functions

Advertising
background image

GB

21

Setting the temperature

Turning the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash .

N.B.: If the set value is compatible with the selected cycle, the knob indicator will be lit (fixed light). If it isn’t, it will flash and 3

beeps will be heard.

The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value

set for each wash cycle.

!

Exception: if the 8 programme is selected, the temperature can be increased up to a value of 90°C.

Setting the spin speed

Turning the SPIN SPEED knobn to set the spin speed for the selected wash cycle.

N.B.: If the set value is compatible with the selected cycle, the knob indicator will be lit (fixed light). If it isn’t, it will flash and 3

beeps will be heard.

The maximum spin speeds available for each wash cycle are as follows:

Wash cycles

Maximum spin speed

Cottons

1200 rpm

Synthetics

800 rpm

Wool

800 rpm

The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol

.

The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed

set for each wash cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.

To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the

selected wash cycle.

Sport

This option allows for selecting the most suitable programme for any type of sports clothing, and is designed to remove dirt while optimally
preserving the technical features of the garments. The various Sport option levels offer the following wash cycles:
-

Sport Shoes, a cycle designed to safely wash up to 2 pairs of sports shoes simultaneously.

-

Gym Kit, a cycle designed to simultaneously wash any type of sports clothing together with gym towels.

-

Technical Wear, designed for specifically washing waterproof garments or clothing with special technical fibres like Gore-Tex, so

as to optimise washing performance while preserving their technical properties over time. Do not use fabric softeners for garments with
technical fibres.
! It cannot be used in conjunction with wash cycles 2-3-4-5-6-7-8-9-10-11-12-13-14- - .

Fast Forward

During a wash programme and under certain conditions, pressing this button allows for ending the wash programme after

only 20’ if necessary, by performing a brief rinse cycle followed by a spin cycle at maximum 800 rpm or lower, if reduced

manually during the programme customisation phase. In this case, washing and rinsing performance will be reduced. After

pressing the button, the relative indicator light turns on together with the indicator light of the rinse phase. If the selected

temperature is equal to 40° and/or the button is pressed during the initial phase of the programme, the “Fast Forward” option

lasts longer so that the detergent can dissolve properly and avoid damaging the fabrics. In this case, the rinse phase indica-

tor light flashes while the wash indicator light remains fixed until the necessary activation conditions are fulfilled. If less than

20’ remain of the wash programme, the option will be disabled.

! It cannot be used in conjunction with wash cycles 2-4-5-6-13-14- - .

Easy iron

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end

of the cycle the washing machine will perform slow rotations of the drum, while the EASY IRON and START/PAUSE indica-

tor lights will flash and the FIN led will remain lit in a fixed manner. To end the cycle, press the START/PAUSE button or the

EASY IRON button.

! It cannot be used in conjunction with wash cycles 1-3-5-13-14- - .

Extra Rinse

By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly

useful for sensitive skin.
! It cannot be used in conjunction with wash cycles 2-4-13-14- .

Personalisation

Advertising