Plug & play feature – Samsung PS50A467P1M Manuel d'utilisation
Page 10
English - 10
Continued...
Plug & Play Feature
When the television is initially powered on, several basic customer settings proceed automatically
and subsequently. The following settings are available.
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly
displayed.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not
be available in some countries.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while
“Plug & Play” is running.
1
If the television is in standby mode, press the POWER
button on the remote control. The message Les menus
Langue, Enr. démo, Canaux et Heure seront définis. is
displayed.
2 Press
the
ENTER button, then Select the OSD
Language. menu is automatically displayed. Press the
ENTER button.
3
Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTER button to confirm your choice.
The message Select ‘Home Use’ when installing this
TV in your home. is displayed.
4
Press the ◄ or ► button to select Store Demo or Home
Use, then press the ENTER button. The message to
check the connected status of the antenna is displayed.
®
The default selection is Home Use.
®
We recommend setting the TV to Home Use mode
for the best picture in your home environment.
®
Store Demo mode is only intended for use in retail
environments.
®
If the unit is accidentally set to Store Demo mode
and you want to return to Home Use (Standard):
Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU
button on the TV for 5 seconds.
5
Press the ▲ or ▼ button to select the channel source to
memorize. Press the ENTER button to select Start.
Digital & Analogue: “Digital” and “Analog” channels.
Digital: “Digital” channels.
Analogue: “Analog” channels.
The channel search will start and end automatically.
Press the ENTER button at any time to interrupt the
memorization process.
After all the available channels are stored, the message
Set the Clock Mode is displayed.
Plug & Play
Les menus Langue, Enr. démo, Canaux et Heure seront définis.
Entrer
OK
Plug & Play
Select “Home Use” when installing this TV in your home.
Home Use
Store Demo
Enter
Move
Plug & Play
Auto Store in progress. Channel 6
Stop
Enter
Skip
Digital Channels : 0
Analogue Channels : --
1%
Plug & Play
Select the OSD Language.
Enter
Menu Language
: English
Move
Nederlands
English
Suomi
Plug & Play
Select the channel source to memorize.
Digital & Analogue
Digital
Analogue
Start
Enter
Skip
Start
Start
Move
w Ow[\WPiu]_TWX\[^hUGGGXW
YWW_TW\TX\GGG㝘䟸GZaYWa[W