Samsung PS58A676T1M - Manuel (Page 65)

English - 65
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1 Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTER button.
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),
then press the ENTER button.
3 Press the ▲ or ▼ button to select On, then press the
ENTER button.
¯

The Anynet+ (HDMI-CEC) function is enabled.
¯
If you select Off, Anynet+ (HDMI-CEC) is disabled.
¯

When the Anynet+ (HDMI-CEC) function is disabled, all
the Anynet+ related operations are deactivated.
Turning an Anynet+ Device Off Automatically when the TV
is Turned Off
2 Press the ▲ or ▼ button to select Auto Turn Off, then
press the ENTER button.
3 Press the ▲ or ▼ button to select Yes, then press the
ENTER button.
¯

The Auto Turn Off function is enabled.
¯

If you select No, the Auto Turn Off function is
canceled. Press the EXIT button to exit.
¯

The active source on the TV remote must be set to TV to
use the Anynet+ function.
¯

If you set Auto Turn Off to Yes, connected external
devices are also turned off when the TV is turned off.
If an external device is still recording, it may or may not
turn off.
Scanning and Switching between Anynet+ Devices
1 Press the TOOLS button.
¯

Anynet+ devices connected to the TV are listed.
¯

If you cannot find a device you want, press the red
button to scan for devices.
2 Press the ▲ or ▼ button to select a particular device and
press the ENTER button. It is switched to the selected
device.
¯

Only when you set Anynet+ (HDMI-CEC) to On in the
Application menu, the Device List menu appears.
3 If you cannot find a device you want, press the ▲ or ▼ button to
select Searching Connections, then press the ENTER button.
The meassage Configuring Anynet+ connection... is displayed.
When searching devices completes, the connected devices are
listed in the Anynet+ menu.
¯

Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
¯

The time required to scan for devices is determined by the number of connected devices.
¯

When the device scan is complete, the number of found devices is not displayed.
¯

Although the TV automatically scans devices when it is turned on using the POWER button, devices connected
when the TV is on or under a specific circumstance are not displayed in the device list. Therefore select
Searching Connections menu to search devices.
¯

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the TOOLS button.
Continued...
WISELINK
Anynet+ (HDMI-CEC) ►
Application
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) :
Auto Turn Off :
Return Enter Move
Off
On
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) :
Auto Turn Off :
Return Enter Move
No
Yes
Tools
Move Enter
View TV
Device List
Recording : DVD
DVD Menu
DVD Menu
Picture Mode : Standard
Picture Mode : Standard
Sleep Timer : Off
▼
Exit
3\URSH 3 %1$LQGE