Connecting to an antenna, Plug & play (initial setup), Getting started – Samsung UN32C4000PDXZA Manuel d'utilisation
Page 8: Info guide
8
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Setup source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
P
POWER
INFO
GUIDE
2
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
y
Select the Home Use mode. Store Demo mode is for retail
environments.
y
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see
the volume OSD, press and hold
MENU
for 5 sec.
3
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button. Select Air, Cable or Auto.
4
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel
→ Auto Program (p.15).
✎
Press the
ENTER
E button at any time to interrupt the memorisation process.
5
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y
Manual: Allows you to manually set the current date and time (p. 20).
6
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV
Press the
ENTER
E button.
If You Want to Reset This Feature...
O
MENU
m → Setup → Plug & Play →
ENTER
E
ANT OUT
VHF/UHF Antenna
Antenna Cable (Not Supplied)
Power Input
or
Cable
[UC4000(32)-ZC]BN68-02651B-04L02.indb 8
2010-08-30 오전 10:18:17