Samsung UN40FH6030FXZA Manuel d'utilisation
Page 11
English - 11
3
b
Wired Network
The TV checks the network connection, then displays the “Wired network and Internet
connection complete” message appears and highlights Next. Press
ENTER
E.
4
Software Update:
Upgrade the software
to the latest version.
On the Software Update screen, press the
ENTER
E button to upgrade the TV’s
software. If new software is available, the player downloads and installs the new
software. When the download is complete, select Next, and then press
ENTER
E.
✎
To upgrade later, select Skip, and then press
ENTER
E. For more information,
see “Software Update” in the e-Manual.
✎
You can only upgrade software if your TV has an active network connection.
✎
If no update software is available, the Auto Program screen appears
automatically.
5
Auto Program (1):
Select where your TV
signal comes from.
Press the
▲ or ▼ button to select the correct option, and then press
ENTER
E twice.
Let’s find and store channels on your TV. Do you need to search for channels?
y
Yes, I need to.: Select if you have an antenna or a cable connection without a set-
top-box, and then go to Auto Program (2) below.
y
No, I don’t need to.: Select if you have a satellite or cable set-top-box. You do not
need to run Auto Program. Select Next or Skip, and then go to 6 Clock - Manual
below.
6
Auto Program (2):
Select the search
options
1. Press
ENTER
E. The Air/Cable screen appears.
2. Press the
▲ or ▼ button to select Air or Cable, and then press
ENTER
E. A
check appears next to your selection. Select Next, and then press
ENTER
E. You
can check both if you have both connected.
3. If you selected Air, channel memorization starts. Go to 5 Auto Program (3). If you
selected Cable, you’ll go to the Cable System screen. Use the
▲ or ▼ button to
select Digital Cable System, and then press
ENTER
E. Use the ▲ or ▼ button
to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTER
E. Most cable systems use STD. Repeat the same process for Analog
Cable System.
4. When done, select Next, and then press
ENTER
E.
7
Auto Program (3):
Channel memorization
Channel memorization starts. Channel memorization can take up to 45 minutes.
When channel memorization is complete, the Channels Memorized screen appears.
Press
ENTER
E. The Clock screen appears.
✎
You can press
ENTER
E at any time to halt the memorization process.
8
Clock: Set the Clock
Press the
▲ or ▼ button to select Auto or Manual, and then press
ENTER
E twice.
Auto
If you selected Auto, you’ll go to the Time Zone screen, and then the DST screen. On
the Time Zone screen, use the
▲ or ▼ button to select your time zone, and then press
ENTER
E twice. On the DST screen, select whether to turn DST (Daylight Savings
Time) On or Off, and then press
ENTER
E. When done, press
ENTER
E.
Manual
If you selected Manual, select Date, and then press
ENTER
E. Use the number
buttons or the
▲ or ▼ button to set the date. Use the ◄ or ► button to move between
entry fields. When done, press
ENTER
E. Select Time, and then press
ENTER
E.
Set the time in the same fashion. When done, press
ENTER
E. Then, select Next, and
then press
ENTER
E. The Setup Complete screen appears.
9
Setup Complete
Review the Setup data, and then press the
ENTER
E button.
If You Want to Re-run Setup...
O
MENU
→ System → Setup →
ENTER
E
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is on. The Function
menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. The Store Demo
mode is set. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to
Source(s) and hold for more than 5 seconds. See page 13 for information about the Controller.
[UF6030-ZC]BN68-04458F.indb 11
2013-02-28 10:23:51