Samsung RS267TDWP-XAA - Manuel (Page 20)

20_ setting up
setting up your side-by-side refrigerator
INST ALLING THE WATER DISPENSER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
Y
dware store.
• 1/4” compression nut • plastic tubing
• copper tubing • ferrule
1. Tighten the compression nut into the 1/4” compr
-
If you are using copper tubing, slip the compression nut (not included) and ferrule (not included)
on copper tubing (not included) as shown.
-
If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing
into the
compr
Do not use without the molded end(Bulb) of the plastic tubing .
2. Tighten the compression nut into the compr
-tighten the compression nut .
3. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut o 1/4” of the plastic tubing to make sure
you get a snug, leak-free connection.
When using power cord
To prevent power cor
d damage, after product installation, arrange
the remaining power cor
CAUTION
• ferrule
i
Assembled)
Assembled)