Samsung PN50B650S1FXZA - Manuel (Page 65)

English - 5
Network Setup
Network Type
Select Cable or Wireless as the method to connect to the network.
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.
Cable: Connect to network using a cable. Connect to network using a cable.
Wireless: Connect to network wirelessly. Connect to network wirelessly.
Network Setup
Cable Network Setup (when Network Type is set to Cable)
Please check if the LAN cable is connected.
Internet Protocol Setup → → Auto Setup / Manual Setup
Network Test: You can test or confirm the network connection status after setting up the network. You can test or confirm the network connection status after setting up the network.
When unable to connect to a wired network
If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time
and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet
as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not
be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an
Internet Sharer (Router).
The internet connection may failure to a firewall problem. In this case, contact your Internet service provider. If you cannot
connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung
Electronics at 1-800-SAMSUNG.
Cable Network Setup
Cable Network Setup-Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.
1. Set Network Type to Cable.
. Select Cable Network Setup.
. Set Internet Protocol Setup to Auto Setup .
The Internet Protocol is set automatically.
4. Select Network Test to check the network connectivity.
Cable Network Setup-Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP).
Please check if the LAN cable is connected. (See page 62)
1. Set Network Type to Cable.
. Select Cable Network Setup.
. Set Internet Protocol Setup to Manual Setup.
4. Set up IP Address, Subnet Mask, Gateway and DNS Server.
Press the number buttons on the remote control when you set the Network manually.
5. Select Network Test to check the network connectivity.
Wireless Network Setup
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 64)
Internet Protocol Setup →
→ Auto Setup / Manual Setup
Network Test: You can test or confirm the network connection status after setting up the network.
When unable to connect to an AP
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try
again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for
the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to
the Internet as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,
please contact a Samsung Electronics at 1-800-SAMSUNG.
❑
N
•
•
❑

N
•
•
N
❑

N

N
N
❑
N
•
•
N
Setup
Game Mode : Off
BD Wise : On
Network Type : Cable
►
Network Setup
V-Chip
Caption
Melody
: Medium
Energy Saving : Off
PIP
BN68-02269B.indb 65 2009-03-31 오후 5:08:17