Changing the input source source, Configuring the basic settings in initial setup – Samsung PN43F4500BFXZA Manuel d'utilisation

Page 8

Advertising
background image

English - 8

Changing the Input Source

Source

When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable

box or STB satellite receiver, you need to change the Source.
1. Press the

SOURCE

button on your remote.

2. Select a desired external input source.

TV / HDMI1 / HDMI2/DVI / AV / Component

You can only choose external devices that are connected to the TV. In the Source list, connected inputs are

highlighted.

How to Use Edit Name
Edit Name lets you associate a device name to an input source, for example, Blu-ray to HDMI 1 To access Edit Name, press the

TOOLS

button when the Source list is displayed. The following selections appear under Edit Name:
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV /

Blu-ray / HD DVD / DMA
Select the name of the device connected to each input jack to make your input source selection easier. When you view the Source list,the

device name and the input jack will be displayed together.

If you have connected a PC to the

HDMI IN 2(DVI)

port with an HDMI cable, select PC under Edit Name to enter a device name.

If you have connected a PC to the

HDMI IN 2(DVI)

port with an HDMI to DVI cable, select DVI PC under Edit Name to enter a

device name.

If you connected an AV device to the

HDMI IN 2(DVI)

port with an HDMI to DVI cable, select DVI Devices under Edit Name to

enter a device name.

Information (in the Edit Name function)
Displays detailed information about the connected external device.

Configuring the Basic Settings in Initial Setup

When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic

settings. Plug the power cord into a wall outlet, and then press the

POWER

button to turn on the TV. Configure your TV's basic settings in

the initial setup by following the instructions on your TV's screen.

Setup is available only when the Source is set to TV.

If you are not using a cable box or satellite box, make you sure have connected the TV to an antenna or cable connection before

you turn on the TV.

If You Want to Re-run Setup...

O

MENU

→ System → Setup →

ENTER

E

[PH4500-5000-ZC]BN68-05661C-00L02.indb 8

2013-12-27 11:02:43

Advertising
Ce manuel est liée aux produits suivants: