Samsung PL50A650T1RXZP - Manuel (Page 8)

English - 8
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while for the picture to appear.
Turning the TV On and Off
Viewing the Displays and Menus
Viewing the Display

Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Viewing the Menus
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH
RETURN
TOOLS
INFO
W.LINK
CH LIST
EXIT
or CH
RETURN
TOOLS
INFO
W.LINK
CH LIST
EXIT
button to scan
through the channels. This eliminates the need to change
channels by entering the channel digits. There are three
steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding and deleting
channels (Channel Lists).
Memorizing the Channels
Storing Channels in Memory
(Automatic Method)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).

Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.

Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.

Press the ▲ or ▼ button to select an antenna
connection, then press the ENTER button.
➢ Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
TV #1 Wed, Jan 2 12:28am
M. Spillane’s Mike Hammer
Bonocrunch
DTV Air
3-
Dolby Digital
480i 4:3 English
11:36 pm - 12:42 am

With the power on, press the MENU button.
The main menu appears on the screen. The menu’s
left side has icons: Picture, Sound, Channel,
Setup, Input, Application.

Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s
sub-menu.
➢ To move to a lower menu, turn the wheel
clockwise when the menu Display is on the
screen. To move to a higher menu, turn the
wheel counterclockwise.

Press the EXIT button to exit.
➢ It takes about one minute until the on-screen
menu disappears.
Mode : Standard
Cell Light : 7
Contrast : 80
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
Channel
Antenna : Air
Auto Program ►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Return Enter Move
Start
Start
Start
Auto Program
Select the cable system.
Analog
Digital
HRC IRC
HRC IRC STD
Start
Return Enter Move
STD
BN68-01363J-00Eng_0327.indd 8 2008-03-27 오후 7:50:18