Samsung UN22D5003BFXZC - Manuel (Page 32)

32
English
Other Information
Issues Solutions and Explanations
Others
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume. • Program the Cable/Sat remote control to operate the TV. Refer to the Cable/Sat user manual
for SAMSUNG TV code.
‘Mode Not Supported’ message. • Check the supported resolution of the TV and adjust the external device’s output resolution
accordingly. Refer to resolution settings in this manual.
Caption on TV menu is greyed out. • Caption can not be selected in the TV menu when connected via HDMI or Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV. • This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu. • This function is only available with digital channels with an Antenna (RF/Coax) connection (Air
or Cable). (P. 20)
TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble.
Channel menu is grey out (unavailable). • Channel menu is only available when the TV source is selected (Antenna or Cable).
Your settings are lost after 30 minutes
or every time the TV is turned off. • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
Please change from Store Demo mode to home Use mode in the Plug & Play procedure.
Press the
SOURCE button to select TV mode, go to MEnU → Setup → Plug & Play →
EnTER E.
You have intermittent loss of audio or
video. • Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the
cables are flexible enough for long term use. Mounting the TV to the wall, we recommend using
cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the
TV. • This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen. • Select home Use under Plug & Play mode.
For details, refer to Plug & Play (Initial Setup). (P. 7)
✎
This TFT LCD/LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of
the product.
¦ Storage and Maintenance
✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Do not spray water or a cleaning agent directly onto the
product. Any liquid that goes into the product may cause a
failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small
amount of water.
[UD5003-ZC]BN68-03703B.indb 32 2011-04-27 �� 9:12:29