Samlex America SSP-150-KIT - Manuel (Page 9)

9 9
3
CONNECTOR SYSTEM FOR CONNECTING SOLAR PANELS
Fig.3.5 above shows an arrangement for connecting second solar panel in parallel that is separated by an
extended distance. In this case, the following will be required:
• SCW-20-2 Connecting Wires Kit - 2 sets (one set is provided with this kit. Second set has to be ordered
separately)
• One MC4 Male Branch Connector and one MC4 Female Branch Connector sold separately as an optional
kit – Model No. “SBC-2” Kit
• One MC4 Male Connector and one MC4 Female Connector sold separately as an optional kit – Model No.
“MC4-2“
In this case, one Connecting Wire Kit “SWC-20-2” and the optional MC-4 Connectors Kit “MC4-2” are first used
to bridge the extended distance between the panels. The optional Branch Connector “SBC-2” Kit is used to
parallel the two solar panels. The second Connecting Wire Kit “SWC-20-2” is used to connect to the Charge
Controller (not supplied).