Power Bright ERP1100-12 - Manuel (Page 2)

Welcome
Please read this manual thoroughly before installing and operating your
new PowerBright
TM
Power Inverter. This manual contains information
you need to obtain the performance required for your application. Keep
this manual for future reference.
About PowerBright
TM
Inverters
PowerBright
TM
, an innovator in portable inverter design, has developed
a new line of super-efficient power inverters with the highest surge
capability in the industry. These extremely advanced, microprocessor
controlled units run cooler and more reliable than any in their class. This
unit has the highest efficiency available (up to 90%), so that longer run
times and extended battery life are achieved.
This PowerBright
TM
inverter converts low voltage, direct current (DC) to
220 volt modified sine wave (MSW) alternating current (AC).
A Higher Wattage Inverter May Be Required
To determine whether the PowerBright
TM
ERP900-12 / ERP1100-12
will operate a particular appliance or a combination of appliances, run a
test. All inverters are designed to automatically shut down in the event
of a power overload. This protection feature prevents damage to the
unit while testing appliances with combined wattages in the 900 watt /
1100 watt range. Turn on the highest wattage appliance first then other
appliances. If an appliance combination in the 900 watt / 1100 watt
range will not operate properly, then it is likely that this PowerBright
TM
inverter does not have the required capacity to operate the appliance in
question.
WARNINGS, CAUTIONS AND NOTES
It's very important that any operator and installer of this inverter read and
follow all WARNINGS, CAUTIONS AND NOTES and all installation and
operation instructions. In particular, comply with WARNINGS (possibility
of serious injury or death), CAUTIONS (possibility of damage to the
inverter and/or other equipment), and NOTES (included to assist you in
achieving the maximum performance and longest working life from this
advanced-design inverter.