Problem solver, Questions? use this problem solver, Before you call for service – GE ZCGS150RSS Manuel d'utilisation

Page 11

Advertising
background image

11

Questions?
Use this
Problem
Solver

PROBLEM

POSSIBLE CAUSE

WHAT TO DO

Compactor won’t

Compactor is unplugged

Make sure the cord is plugged securely into

operate

a working outlet.

Circuit breaker/fuse is

Check house circuit breakers/fuses.

tripped/blown

Replace fuses or reset breaker.

Knob switch may not be

Make sure the switch is in the ON position.

in the ON position

Foot pedal may not be

Lift foot pedal up momentarily until

lifted up long enough to

compaction cycle starts.

start cycle

Drawer may not be closed

Check to make sure the drawer is firmly
closed.

Compactor has an

If you have just compacted repeatedly,

automatic thermal

this protector may have opened the motor

motor reset

circuit. Wait a few minutes and the motor
reset will reclose automatically.

Drawer is hard

Trash may have fallen

Remove any trash.

to close

behind the drawer

Drawer will not

The ram is not all the

Lift up on the foot pedal and release to

open

way up

allow ram to complete a cycle.

Little or no apparent

Drawer is not full enough

The drawer must be at least 1/2 full of

compaction

trash before you will see any amount of
compacting. The ram does not travel all the
way to the bottom. Trash in the bottom of
the drawer will be crushed during later
cycles.

Trash is stuck between

Remove any trash.

ram and basket

Before You Call For Service

Compactor

Advertising