Key (command: m c) (not supported), Osd select (command: k l), Operating time (command: d l) – HP Écran LED 55 pouces pour enseigne numérique HP LD5535 Manuel d'utilisation

Page 105

Advertising
background image

Data
00: Off (Lock Off)
01: On (Lock On)
* Display will not be turned on by power on key of remote controller and front panel control keys, if

key is locked on in standby mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]

36. Key (Command: m c) (not supported)

To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on the model.

37. OSD Select (Command: k l)

To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]

38. Operating time (Command: d l)

To check the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Read the status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]

Transmission / Receiving protocol 95

Advertising