LG WT5680HWA - Manuel (Page 25)

25
ENGLISH
HOW TO USE
OPTION BUTTONS
Your washing machine features several additional cycle
options that customize cycles to meet your individual
needs. To use these options, select the desired option
AFTER selecting the desired cycle.
After selecting the desired cycle and settings, press
the cycle option button(s) for the option(s) you would
like to add. The button will light when that option is
selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to alert you
and the LED will not illuminate.
NOTE:
y To protect your garments, not every option is avail-
able with every cycle.
y If the START/PAUSE button is not pressed within
five minutes to start the cycle, the control will shut
off and all settings will be lost.
STEAM
Adding the Steam option to a wash cycle helps provide
superior cleaning performance. By using hot steam,
the fabrics will get the cleaning benefits of a very hot
wash.
NOTE:
y The steam option cannot be used with all cycles.
y The STEAM option is automatically deselected if
Turbo Wash™ is selected for the COTTON/NOR-
MAL, HEAVY DUTY, BRIGHT WHITES™ and SANI-
TARY cycles.
y Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could dam-
age clothing.
y Do not use steam with delicate fabrics such as wool,
silk, or easily discolored fabrics.
COLD WASH™
This option saves energy by using cooler water while
increasing the wash and rinse times to maintain wash
performance.
NOTE:
y The Stain Care™ feature cannot be selected with the
Cold Wash™ option.
y Wash time will increase up to 50 minutes with the
Cold Wash™ option.
y For best wash results, only wash small loads (less
than 8 pounds) with the Cold Wash™ option.
DELAY WASH
Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by
one hour, for up to 19 hours. Once the desired delay
time is set, press the START/PAUSE button to start the
delay time.
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically
shut off after five minutes and all cycle settings will
be lost.
CUSTOM PROGRAM (PGM)
Custom Program allows you to store a customized
wash cycle for future use. It allows you to save your
favorite temperature, spin speed, soil level, and other
options for a cycle, and then recall them at the touch of
a button. To create a Custom Program:
1. Press the POWER button to turn on the washer.
2. Turn the cycle selector knob to select the desired
cycle.
3. Press the cycle modifier button to change the de-
sired setting.
4. Press the cycle option button to add the desired op-
tions.
5. Press and hold the CUSTOM PROGRAM button for
3 seconds.
TO RECALL A CUSTOM PROGRAM:
1. Press the POWER button to turn on the washer.
2. Briefly press the CUSTOM PGM button. The stored
settings will display.
3. Press the START/PAUSE button to start the cycle.
(Pressing any other button at this time will cancel the
Custom Program.)
NOTE: You may only save one custom program at a
time. Pressing and holding the CUSTOM PROGRAM
button will overwrite any previously saved custom pro-
gram.
TURBO WASH™
Adding the Turbo Wash option reduces the cycle time
while still providing similar wash performance to the
same cycle without Turbo Wash.
NOTE:
y The Turbo Wash™ option cannot be used with all
cycles.
y Turbo Wash™ defaults ON for COTTON/NORMAL,
HEAVY DUTY and SPEED WASH cycles.
y Turbo Wash is automatically deselected for COT-
TON/NORMAL, HEAVY DUTY, BRIGHT WHITES™
and SANITARY cycles if the STEAM option is se-
lected.
y Do not touch the lid during steam cycles. The lid
surface can become very hot. Allow the lid lock
to release before opening the door.
y Do not attempt to override the lid lock mecha-
nism or reach into the washer during a steam
cycle. Steam can cause severe burns.
WARNING