What to do if – Electrolux ERF3867SOX Manuel d'utilisation

Page 13

Advertising
background image

6. WHAT TO DO IF…

During operation of the appliance some
smaller but annoying trouble can often oc-
cur, which does not require calling a tech-
nician out. In the following chart informa-
tion is given about them to avoid unnec-
essary charges on service.

The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.

The appliance operates discontin-
uously, so the stopping of com-
pressor does not mean being no
current. That is why you must not
touch the electrical parts of the
appliance before breaking the cir-
cuit.

Problem

Possible cause

Solution

The appliance is
noisy.

The appliance is not sup-
ported properly.

Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".

The buzzer sounds.
The Alarm icon
flashing.

The door is not closed
correctly.

Refer to "Door open alarm".

Upper or lower
square is shown in
the temperature dis-
play.

An error has occurred in
measuring the tempera-
ture

Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible)

The compressor
runs continuously.

The Temperature regulator
may be set incorrectly.

Set a warmer temperature.

The door is not closed
correctly.

Refer to "Closing the door".

The door has been
opened too frequently.

Do not keep the door open
longer than necessary.

The food temperature is
too high.

Let the food temperature
decrease to room tempera-
ture before storage.

The room temperature is
too high.

Decrease the room temper-
ature.

Water flows inside
the refrigerator.

The water outlet is clog-
ged.

Clean the water outlet.

Food prevent that water
flows into the water collec-
tor.

Make sure that food do not
touch the rear plate.

Water flows on the
ground.

The melting water outlet
does not flow in the evap-
orative tray above the
compressor.

Attach the melting water
outlet to the evaporative
tray.

ENGLISH

13

Advertising