Bosch HEI8054U - Manuel (Page 14)

English 11
Triple Element Control Knob (some models)
To turn on the small inner element only, push in on the
control knob and turn it to the symbol
(counterclockwise). Turn knob left or right to set the heat
level.
To turn on the inner and middle elements, push in and turn
the control knob to the
symbol. Turn knob left or right to
set the heat level.
To turn on all three elements, push in and turn the control
knob to the icon. Turn knob left or right to set the heat
level.
For each of the three element sets (A,B,C) the unit
temperature can be adjusted from LO to HI to provide a
more precise temperature setting.
Warming Zone
The warming zone is controled through the oven control
panel.
To turn on the warming zone
1. Press the Warming Zone touchpad.
2. Press Enter.
To turn off the warming zone
1. Press the Warming Zone touchpad.
Surface Element On/Hot Indicators
There is an embedded panel near the front of the cooktop
with individual lights representing each element. These
lights are illluminated when an element is “on”. The light
remains on as long as the element is hot. When the
element is sufficiently cooled down, the light goes out.
Cooktops with a triple front element
Cooktops with a double front element
Surface Elements Disabled During Self Clean (some
models)
All surface elements are automatically disabled during Self-
Clean Operation only. This is normal. Once the Self-Clean
cycle is complete and the oven has cooled, the elements
become operable once again.
9 WARNING
To avoid risk of personal injury, while the self clean
cycle is operating, do not operate the cook top and
ensure that all surface controls are turned off.