Wash cycle information, Operating the dishwasher, Wash cycle options – Bosch SGV63E03UC Manuel d'utilisation

Page 12: Start the dishwasher, Cancel a cycle, Interrupt a cycle

Advertising
background image

10

Wash Cycle Options

Delay Start: Allows you to delay the start time of your dishwasher in one hour increments up to 24 hours.
Eco: Lowers temperature and cycle length to decrease energy usage.
Half Load: In the Heavy, Auto, Normal, Delicate and Glass Care wash cycles, the Half Load option can
reduce the energy and water consumption when washing small, lightly soiled loads that fill approximately
half of the dishwasher’s capacity. To activate, select the Half Load button in addition to any of the three
cycles listed above.
Extra Wash: This cycle option can be selected to increase wash performance with more water used in
extra sequences and at higher temperatures.
Sanitize Option: The Sanitize feature is available only in the Heavy, Auto and Normal cycles. Press the
“Sanitize Option” button to activate the Sanitation features during the Auto and Normal cycles. The
Sanitize light will always be on when running a Heavy cycle. The technical sanitation measures may also
improve the drying results.

Note: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize option

in your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on.

Wash Cycle Information

The cycle times in this Use and Care Manual are based on normal soil loads and 120°F incoming water and will vary

based on your actual conditions

.

Note: Only sanitizing cycles have been designed to meet the requirements of 6 for soil removal and sanitization effi-

cacy. There is no intention, either directly or indirectly, that all cycles have passed sanitization performance tests.

Operating the Dishwasher

Start the dishwasher

1

Open the door and press the [On/Off] button. The LED of the last selected cycle flashes.

2

Select a cycle and desired options.

3

Press [Start] and close the door.

Cancel a cycle

1

Open the door and press and hold the [Start] button for approximately 3 seconds until the display
reads “0:01”.

2

Wait about 1 minute while the dishwasher drains.

3

Open the door and press the [On/Off] button.

Interrupt a cycle

1

Open the door and press the [On/Off] button to turn the unit off.

2

To resume the cycle, press the On/Off button again and close the door.

Table 3 - Wash Cycle Information

Heavy

Auto

Delicate

Normal

Express

Glass Care

cycle time

110-135 min

105-129 min

80-85 min

95-119 min

30 min

70 min

cycle time with Half Load option

115 min

95-105 min

75-80 min

90-99 min

not available

65 min

cycle time with Sanitation option

125-145 min

120-140 min

not available

115-130 min

not available

not available

cycle time with Extra Wash option

145 min

120-140 min

95-105 min

115-135 min

not available

85 min

water consumption

18.1-23.7 L

4.8-6.3 gal

13.1-24.9 L

3.5-6.6 gal

8.8-13.9 L

2.3-3.7 gal

5.8-16.9 L

1.5-4.5 gal

10.3 L

2.7 gal

12.9 L

3.4 gal

wash temperature

66-71°C

150-160°F

55-66°C

130-150°F

45-50°C

113-122°F

50-55°C

122-131°F

45°C

113°F

50°C

122°F

rinse temperature

72°C

162°F

70°C

158°F

63°C

145°F

51-69°C

124-156°F

50°C

122°F

60°C

140°F

Advertising