Brother HL-8050N - Manuel (Page 8)

7
Federal Communications Commission (FCC) Declaration of
Conformity (Pour les Etats-Unis uniquement)
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911
USA
Telephone: (908) 704-1700
declares, that the products
Product name: Laser Printer
Model number: HL-8050N
Product options: All
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Adjust or relocate the receiving antenna.
– Increase the distance between the equipment and receiver.
– Connect the equipment to an AC power outlet/socket on a circuit
different from that which the receiver is already connected.
– Call the dealer or an experienced radio/TV technician for help.
Important
A shielded interface cable should be used in order to ensure compliance with
the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd.
could void the user's authority to operate the equipment.
Déclaration de conformité aux prescriptions de Industry
Canada (Pour le Canada uniquement)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Sécurité Laser (modèle 100-127 volts uniquement)
This printer is certified as a Class 1 laser product under the U.S. Department
of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. This
means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within
protective housings and external covers, the laser beam cannot escape from
the machine during any phase of user operation.
FDA Regulations (modèle 100-127 volts uniquement)
U.S. Food and Drug Administration (FDA) has implemented regulations for
laser products manufactured on and after August 2, 1976. Compliance is
mandatory for products marketed in the United States. The label shown on
the back of the printer indicates compliance with the FDA regulations and
must be attached to laser products marketed in the United States.
☛Attention : L'usage de commandes et de réglages ou l’exécution de
procédures autres que ceux ou celles spécifié(e)s dans le
présent guide sont susceptibles de se traduire par une
exposition à des rayonnements dangereux.
Spécification CEI 60825 (modèle 220-240 volts uniquement)
Cette imprimante est un produit laser de classe 1 selon les caractéristiques
définies dans la norme CEI 60825. L’étiquette figurant ci-dessous est
apposée dans les pays qui l’exigent.
Cette imprimante renferme une diode à laser de Classe 3B qui émet un rayon
laser invisible dans l'ensemble scanner. A ce titre, il est impératif de ne
jamais ouvrir l'ensemble scanner.
☛ Attention : L'usage de commandes et de réglages ou l’exécution de
procédures autres que ceux ou celles spécifié(e)s dans le
présent guide sont susceptibles de se traduire par une
exposition à des rayonnements dangereux.
Réglementations
Déclaration de conformité pour la CE conformément à la
Directive R & TTE
Fabricant
Brother Industries Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japon
déclare dans la présente que :
Description du produit : Imprimante laser
Nom du produit : HL-8050N
est conforme aux dispositions de la Directive R & TTE (1995/5/EEC 2002)
et déclare que ce produit respecte les normes suivantes :
R&TTE : EN300330-2 V1.1.1
EN301489-3 V1.3.1
CE0682
Sécurité : EN60950 : 2000
CEM : EN55022 : 1998 + A1 : 2000 Classe B
EN55024 : 1998
EN61000-3-2 : 1995 + A14 : 2000
EN61000-3-3 : 1995
Année de premier marquage CE : 2003
Délivré par : Brother Industries, Ltd.
Date : 7 juillet 2003
Lieu : Nagoya, Japon
Signature :
Takashi Maeda
Responsable
Groupe Management de la qualité
Service de gestion de la qualité
Société Information & Document
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21
CFR Subchapter J.
CLASS 1LASERP RODUCT
APPAREIL Å LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
!