Amana TANDEM W10240880A - Manuel (Page 5)

QUICK START GUIDE
Select an AUTO DRY cycle.
Press and hold START/PAUSE to begin. 6.
Close the door and press and hold START/PAUSE
until dryer starts.
Open the door or press START/PAUSE once.
Press POWER.
Press and hold START/PAUSE to begin.
Select a TIMED DRY cycle.
Press the TEMP button until the desired temperature is lit.
Press POWER or press the cycle selector button.
Place laundry in the dryer. Shut the door.
Clean the lint screen.
Press POWER or press the cycle selector button.
Place laundry in the dryer. Shut the door.
Clean the lint screen.
Select the CYCLE SIGNAL feature, if desired.
USING AUTO DRY CYCLES USING TIMED DRY CYCLES
Auto Dry Cycles automatically match
the cycle setting to the type of load and
adjust drying time for optimal performance.
See the Cycles information on the following
pages for more detail on each cycle.
Use Timed Dry cycles to set a
drying time and temperature.
See the Cycles information on the
following pages for more detail on each cycle.
Select the CYCLE SIGNAL feature, if desired.
7.
WARNING: To reduce the risk of fire electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
This Use and Care Guide covers several different models. Your dryer may not have all the cycles and features described.
You may select or deselect the CYCLE SIGNAL feature at any
time during the cycle, if desired.
To add or remove options during an AUTO DRY Cycle:
You may select or deselect the CYCLE SIGNAL feature at any
time during the cycle, if desired.
To add or remove options during an TIMED DRY Cycle:
5