Sunex Tools SX5206 - Manuel (Page 3)

Specifications SX5205
Collet/Spindle Size ......................................................... 1/4"
Free Speed ........................................................ 22,000 RPM
Motor Size .................................................................. 0.5 HP
Length ................................................................7" (178mm)
Weight ............................................................ 1.3 Lbs. (6 kg)
Avg. Air. Cons. ............................................3.1 cfm (88 l/min)
Air Inlet ................................................................... 1/4" NPT
Min. Hose Size ............................................ 3/8" I.D. (10mm)
Instruction Manual
This product is equipped with 1/4” collet chuck for use with
various burrs for polishing and grinding. No other use is permitted.
Air Supply Requirements
Tool is designed to operate at 90 psi (6.2 bar) at free speed
measured at the tool, of clean, dry air. Operating this tool at higher
pressures will drastically reduce the tool life and could cause injury.
The air inlet thread on this tool is a standard 1/4" NPT. Line
pressure should be increased for any unusually long air hose run
EC DECLARATION OF CONFORMITY
We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest, SC
29690, declare under our sole responsibility that the product to
which this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on the
approximation of the laws of the Member States relating to ma-
chinery. (EN792, 98/37/EC)
Harmonized Standards Applied: EN 792-6
National Standards Applied: ISO 8662-7, ISO 15744-2002
Machine Name: SX5205 Die Grinder
Serial No.: TS0121701 or higher
Techical Data: 1/4” Collet Std., Air Pressure: 90 psi (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 86 dBA
sound pressure with 3 dBA uncertainty per
EN ISO15744-2002. Vibration level is <2.5 m/s2
tested per EN 28662-1 & EN28662-7:1997
EC DECLARATION OF CONFORMITY
We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest, SC
29690, declare under our sole responsibility that the product to
which this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on the approxi-
mation of the laws of the Member States relating to machinery.
(EN792, 98/37/EC)
Harmonized Standards Applied: EN 792-6
National Standards Applied: ISO 8662-7, ISO 15744-2002
Machine Name: SX5205L Die Grinder with 5” Extension
Serial No.: TS0121701 or higher
Techical Data: 1/4” Collet Std., Air Pressure: 90 psi (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 86 dBA
sound pressure with 3 dBA uncertainty per
EN ISO15744-2002. Vibration level is <2.5 m/s2
tested per EN 28662-1 & EN28662-7:1997
Drain Daily
Regulator Oiler Quick Coupler Leader
Hose
Nipple
Do Not Install
Quick Coupling
Here
Nipple
Filter
Air Supply
Whip Hose
(over 25 feet). Minimum hose diameter should be 3/8" I.D. and all
fittings should have the same inside diameter. See diagram to the
left for proper air supply setup.
Lubrication
Lubricate the tool each day after use with quality SAE #10 air
motor oil. Add the oil to the air inlet or into the hose at the nearest
connection to the air supply, then run the tool until all excess oil
is expelled from the exhaust. Total oil quantity needed for this
procedure is approximately 1 ounce. If using an air line lubricator
adjust to two drops per minute.
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc. Date of Issue: May 9, 2012.
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc. Date of Issue: May 9, 2012.
Specifications SX5205L
Collet/Spindle Size ......................................................... 1/4"
Free Speed ........................................................ 22,000 RPM
Motor Size .................................................................. 0.5 HP
Length ..............................................................11" (280mm)
Weight ......................................................... 1.8 Lbs. (0.8 kg)
Avg. Air. Cons. ............................................3.1 cfm (88 l/min)
Air Inlet ................................................................... 1/4" NPT
Min. Hose Size ............................................ 3/8" I.D. (10mm)
SX5205, SX5205L, SX5206: Parts Breakdown & Operating Manual 3 Rev. 08/07/12
SX5205_5205L_5206_Manual_080712.indd 3 8/9/12 5:45 PM