LiftMaster 8557 Elite Series 3/4 HP AC Belt Drive Garage Door Opener - Manuel (Page 6)

6
Operation
Features How to Set Features: Use the navigation buttons to scroll to the menus.
Use the button to select the desired feature.
Clock Setup Set the time, choose 12 or 24 hour clock and show/hide clock.
Timer to Close
(TTC) Set the Timer-to-Close feature off/on and set the time interval (1, 5, 10
or a custom setting up to 99 minutes) before door closes. NOTE: DO
NOT enable TTC if operating a one-piece door. TTC is to be used ONLY
with sectional doors.
Lock Enable/disable lock.
Temperature Display the temperature in Fahrenheit or Celsius and show/hide the
temperature.
Language Select a language.
Light Set duration for garage door opener light to stay on after operation,
selectable range of 1-1/2 to 4-1/2 minutes. Turn the Motion sensor off/
on, and turn the entry light feature off/on.
Contrast Adjust the contrast of the screen.
To Program
a Remote
Control or
Keyless Entry 1. Press the navigation button below “MENU” to view the Features
menu.
2. Use the navigation buttons to scroll to “PROGRAM” and press the
navigation button under to continue.
3. Select “REMOTE” or “KEYPAD” to program from the program menu.
Press to continue.
4. Remote Control: Press the button on the remote control that you
wish to operate your garage door.
Keyless Entry: Enter a 4-digit personal identifi cation number (PIN)
of your choice on the keyless entry keypad. Then press the ENTER
button.
The garage door opener lights will fl ash (or two clicks will be heard)
when the code has been programmed.
Repeat the steps above for programming additional remote controls
or keyless entry devices. If programming is unsuccessful, repeat steps
1-3 or program the remote using the learn button on the garage door
opener.
Navigation Buttons
* Not included with all models. Accessories vary depending on the model purchased.
Programming - Smart Control Panel*