Robertshaw 9725i2 USERS MANUAL - Manuel (Page 21)

SYSTEM SETTINGS page 3 of 5
Select Service Intervals to set service reminders for primary system components of the
heating/cooling system that need periodic attention.
Based on the intervals you set, these reminders are displayed on the main screen when a part
needs to be serviced:
Heating System Checkup Recommended
Cooling System Checkup Recommended
Heat Pump System Checkup Recommended
All service intervals can be set to OFF or for a period of 1-12 months.
When the main screen reminder appears, you can select either of
these choices:
Delay – This is a 24-hour delay. The reminder appears again in
one day.
Reset – This resets the service reminder. It will appear again at
the end of the interval that’s been set.
Cooling Limit and Heating Limit.
To prevent extremes in thermostat settings, use this menu item to limit maximum cooling and
heating mode temperatures.
Choose either (or both) a cooling or a heating limit to set.
Set a temperature from 45ºF to 90ºF (7ºC to 32ºC).
21
System Settings Menu
Back Select
Balance Points
Service Intervals
Cooling Limit 45°F
Heating Limit 90°F
Heating System
Checkup
Recommended
Delay Reset