CAMPO EQUIPMENT BLAZE 2000 D/G - Manuel (Page 7)

THE INSTALLATION SHALL CONFORM WITH LOCAL CODES OR, IN THE ABSENCE OF LOCAL
CODES, WITH THE NATIONAL FUEL GAS CODE, ANSI Z223.1/NFPA 54 AND THE NATURAL GAS
AND PROPANE INSTALLATION CODE, CSA B149.1
NOTE: THE PROPER POSITION ON THE EASY SWITCH OVER BLUE HANDLE BALL VALVE MUST BE USED AND
RATING PLATE MUST REFLECT THE FUEL THE HEATER IS BURNING. DO NOT OPERATE THE HEATER
WITHOUT CONSULTING THE RATING PLATE.
HEATER CONVERSION MUST BE DONE BY A QUALIFIED TECHNICIAN AND RATING PLATE MUST REFLECT ANY
CHANGE.
THIS UNIT HEATER IS EQUIPPED FOR NATURAL GAS OR LP GAS. THIS UNIT HEATER IS EQUIPPED WITH
ORIFICES SIZED FOR OPERATION WITH NATURAL OR LP GAS VIA THE EASY SWITCH OVER BLUE HANDLE
BALL VALVE. FOR CONVERSION TO LP (OR NATURAL) GAS SEE INSTRUCTION PLATE ON THE APPLIANCE.
Easy switch over Blue handle Ball Valve on Gas manifold.
Closed position: Propane
Open position: Natural Gas