Kolpin 26500 – Utility Gear Rail System Bracket - Manuel (Page 2)

Rev. 1
Mounting Instructions:
1. To mount the two brackets together use the 4 – ¼” x ¾” Bolts provided. Attached using the (3)
horizontal slots in the bracket. The Mounting Bracket Plate should be used so it is under the
Mounting Base Plate. See above picture.
2. Mount the bracket to the C-Clamp by attaching the remaining (4) Truss Head bolts to the four
corners of the C-Clamp.
3. The C-Clamp then slides onto the 26400 Utility Gear Rail System. Tighten the C-Clamp using
the Star Turn Knob provided.
4. Accessorize as necessary.
Usage:
• Double Gun Boot Mount using Gun Boots and Boottector Bracket
• To haul tools such as weed eaters, rakes, shovels, etc.
• Carry guns using Gear Grips or Gun Grips II.
• Transport Kolpin Fuel/Water Packs for long trips or use around the house.
Able to Transport equipment quickly and easily without using up the precious
space of the Cargo Box.
Kolpin Outdoors, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-6514
www.kolpinpowersports.com
[email protected]