INSTEON 75791 Quick Start - Manuel (Page 4)

Quick Start for users with the INSTEON Hub
1. Launch the INSTEON for Hub app on your iOS or Android mobile device
2. Tap the settings icon (image of gear) on the lower navigation bar
3. Tap Edit Settings
4. Tap on Devices
5. Tap on Add button (on Android Tap on “+”)
6. Tap on Camera icon
7. Play video and follow verbal instructions
Quick Start for other users
1. Screw antenna on back of camera
2. Plug network cable into camera and into your router (you can unplug this once WiFi
is setup)
3. Plug power supply into camera and into an outlet (after about 30 seconds the
camera will run a self-test of its motor controls 1 )
4. Visit insteon.com/camtool and click on the download button for your operating
system
5. Locate and open the downloaded zip file
6. If Windows
Run the setup program
Run the IP Camera Tool app from desktop
If Mac
Run the IP Camera Tool app
7. Double-click on anonymous
8. Enter admin into the User Name field
9. Leave password field blank
10. Click OK/Log-In button
11. Click on button that corresponds to your browser
If you are using Internet Explorer click on the Install button to install ActiveX
control, then click on Internet Explorer button, then click on Yes
12. You will now see video from your camera
13. Click on Device Management (lower left)
14. Click on Wireless LAN Settings
15. Click the Scan button
16. In the Wireless Network List, click on the WiFi network you want the camera to use
17. Enter your WiFi’s password, share key or other security info (doesn’t apply if WiFi
is not encrypted)
18. Click on the Submit button (camera will reboot)
1 Does not apply for outdoor cameras
3