Lexibook DMP63BBZ/DMP63SPZ - Manuel (Page 16)

16
Replay mode
1. Press MODE once in stop/pause mode to enter recording mode.
“MP3” will flash.
2. Press either once to enter recorder mode. “REC” will flash.
3. Press MODE to confirm, and enter the recording initial mode.
4. Use the key to listen/pause/stop the playback of the recording.
5. Press MODE twice to exit recording mode.
1. In music playback mode, press RECORD to define the starting
point of the segment, and “A-” will appear on display.
2. Then, press the RECORD key again to define the ending point of
the segment. “A-B” will appear on display.
3. When the A-B Repeat function has been enabled, the unit will play
the specified segment again and again.
4. Press the RECORD key once more to cancel the A-B Repeat
function and return to normal play mode.
A-B Repeat function
You can delete the music and recording data directly from the unit.
You can also execute this command on your computer.
1. In MUSIC/RECORD initial/stop/pause mode, press the MODE key
once to enter system setting, “MP3” will flash.
2. Press the key 1 time to enter the DELETE function mode.
3. The default selection is “NO DEL” (no deletion). Use the V+ or V-
key to toggle the selection between yes and no.
Delete function
4. Press MODE to confirm. If you select “No”, the unit will return to the
previous mode; if you select “Yes”, “dEL---” will be displayed and the
current file will be deleted.
5. Then, the unit will return to stop status at the beginning of the next
track.
English English
Hold function
To disable all the keys, press and hold the RECORD and MODE keys at
the same time. The “ ” icon will displayed. Press and hold the RECORD
and MODE keys at the same time to deactivate the hold function. Note:
the hold function will be deactivated automatically when the unit turns off
automatically and during the connection to a USB port.
LED backlight
Press any key to turn the blue backlight on. The LCD screen will light
up during 10 seconds.
Low battery
When the battery is low the battery indicator will flash. “Lo” will be
displayed if you try to record new data.
Reset
WARNING: If the unit malfunctions or receives an electrostatic shock,
switch the unit off and on again using the MODE button. If this proves
to be ineffective, remove the batteries and insert them again.
Options