Gotham PDTFI - Manuel (Page 4)

SAVE THESE INSTRUCTIONS
CJ520364 Rev. B
2/2014
4 OF 6
Figure 7
Figure 8 Figure 9
Figure 10 Figure 11
Figure 12
Figure 7a
Min. 0.75 mm 2 Supply Conductors
After connecting to terminal block, secure
supply leads together with wire tie.
“Please make sure that a minimum distance of 75mm is left
between the top of the fixture and the bottom of the box or building
member. Additionally, make sure that all fixture parts are a
minimum of 150mm from the side walls of the box or building
member.”
NOTE: Only for 2 lamp luminaires (8 inch horizontal)
Figure 6