Asus P4P800 SE - Manuel (Page 122)

5-20 Chapitre 5: Support Logiciels
5.61.6 Réinitialiser les données RAID
Pour réinitialiser les données RAID et éliminer les structures RAID des
disques:
1. Choisissez 3. Reset RAID Data et pressez <Entrée>.
2. L’utilitaire renvoie un message de confirmation, pressez <Y>.
Prenez garde en utilisant cette option; toutes les données des disques
RAID et toutes les structures RAID internes seront perdues !
2. Pressez <Del> pour effacer le volume RAID.
3. L’utilitaire renvoie un message de confirmation, pressez <Y>.
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
Serial # Size Status Bootable
0 ST380013AS xxxxxxxx 74.5GB Normal Yes
1 ST380013AS xxxxxxxx 74.5GB Normal Yes
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RaID
4. Exit
[ ]-Select [ ]-Select [ESC] Exit [ESC] Exit [Enter]-Select Menu [Enter]-Select Menu
Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.
[ RESET ALL DATA RAID DATA ]
WARNING: Selecting "Yes" will cause all data on any RAID disk
(RAID Volume or Other RAID Disk) to be lost.
Are you sure you want to destroy all RAID data (Y/N):
Are you sure you want to delete this volume?
ALL DATA IN THE VOLUME WILL BE LOST!!
Are you sure you want to delete volume "RAID_Volume1"? (Y/N)
[ VOLUME DELETE VERIFICATION ]