Asus P4C800-E Deluxe - Manuel (Page 147)

Guide de l’utilisateur de la carte mère ASUS P4C800-E Deluxe 5-37
5.5.6 Réajuster un RAID en non-RAID
Pour réajuster une structure RAID en non-RAID :
1. Sélectionnez 3. Reset Disks to Non-RAID et appuyez sur <Entrée>.
2. Quand un message de confirmation apparaît, appuyez sur Y pour
retourner à un structure de disque dur non-RAID.
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
Serial # Size Status Bootable
0 ST320413A xxxxxxxx 18.6GB Normal Yes
1 ST320413A xxxxxxxx 18.6GB Normal Yes
Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RaID
4. Exit
[ ]-Select [ ]-Select [ESC] Exit [ESC] Exit [Enter]-Select Menu [Enter]-Select Menu
Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.
[ RESET ALL DATA RAID DATA ]
WARNING: Selecting "Yes" will cause all data on any RAID disk
(RAID Volume or Other RAID Disk) to be lost.
Are you sure you want to destroy all RAID data (Y/N):
Prenez garde en réajustant un RAID en non-RAID. Réajuster toutes
les donnéesRAID supprimera toutes les structures RAID internes des
diques RAID !