Factory Direct Hardware Hansgrohe 14801 Allegro E - Manuel (Page 6)

6
Install the hot and cold supply hoses on the stops
with 3/8” compression fittings (included). Use two
wrenches, as shown, to prevent the hoses from twist-
ing and becoming loosened from the faucet.
Do not allow either hose to twist.
Twisting the supply hose may cause
it to loosen from the faucet, which
may cause water damage.
Turn on the water and check all connections for leaks.
14801XX1 Installation
Position the faucet and sealing ring on the mounting
surface.
Install the fiber washer, metal washer, and mounting
nut. Tighten the tensioning screws.
English