BabyTrend 8689 - TAHOE HIGH CHAIR - Manuel (Page 4)

5. Secure the recline fitting in place with a (3.5mm x 15)
screw as shown in figure 5. Repeat for the opposite side.
Tighten the screw until snug: do not over-tighten.
6. Align the footrest with the seat base as shown in figure 6.
7. Insert the seat brace through the seat base rings and
footrest as shown in figure 7.
8. Align the holes on the seat brace with the holes in the
bottom of the seat base as shown in figure 8.
Figure 5
Figure 7
Seat Brace
Footrest
Figure 6 Figure 8
9. Secure the seat brace with 2 (3.5mm x 10) screws as
shown in figure 9. Tighten the screws until snug: do
not over-tighten. Check that the seat brace is securely
held in place by the screws by trying to move it in both
directions.
10. Slide the right side height bracket onto the end of the
seat brace as shown in figure 10. Secure the right side
height bracket to the seat brace with 1 (3.5mm x 10)
screw.
11. Secure the height brackets to the seat brace with the 2
(6mm x 15) bolts and 2 (6mm) Nuts provided. Please
see figure 11. Tighten the screws until snug: do not
over-tighten. Check that the height bracket is securely
attached to the seat.
Secure
with screws
Height
Bracket
Seat
Brace
Figure 9
Figure 10
Figure 11
4
Attach
3.5mm x 10
screw here
L
R
L
R