Product data sheets – Whirlpool 2205958 Manuel d'utilisation

Page 28

Advertising
background image

28

PRODUCT DATA SHEETS

Standard Interior Water Filtration System Model WFI-NL200/NL200

Capacity

: 200 gallons (757 liters),

Service flow rate:

0.5 GPM (1.89 L/min.) @ 60 psi.

Cyst Interior Water Filtration System Model WFI-NLC200/NLC200

Capacity

: 200 gallons (757 liters),

Service flow rate:

0.5 GPM (1.89 L/min.) @ 60 psi.

It is essential that operational, maintenance, and filter
replacement requirements be carried out for this product to
perform as advertised.

Model NL200 Change cartridge at least every 6-9 months.
Use replacement cartridge NL200, part# 8171413. 2000
suggested retail price of $29.95 U.S.A./$39.95 Canada.

Model NLC200 Change the cartridge at least every 6-9
months. Use replacement cartridge NLC200, part# 8171414.
2000 suggested retail price of $39.95 U.S.A./$49.95 Canada.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used
on disinfected water that may contain filterable cysts.

Refer to the “Assistance or Service” section for the
Manufacturer’s name, address and telephone number.

Refer to the “Warranty” section for the Manufacturer’s limited
warranty.

Application Guidelines/Water Supply Parameters

*

Test requirement is at least 100,000 particles/ml of AC Fine Test Dust.

**

Cyst performance is % reduction based on NSF Standard 53.

***

Test requirement is 0.15 mg/L ± 10%. These contaminants are not necessarily in your water supply.

Performance may vary based on local water conditions.

® NSF is a registered trademark of NSF International.

Substance
Reduction

U.S. EPA
MCL

Average
Influent

Maximum
Effluent

Average
Effluent

Minimum %
Reduction

Average %
Reduction

NSF Test
Number

Chlorine, Taste/Odor

N/A

2.0 mg/L

N/A

0.02 mg/L

N/A

99%

994715

Substance Reduction
Aesthetic Effects

Chlorine Taste/Odor
Particulate

U.S. EPA
MCL

N/A
N/A

Average
Influent

1.9 mg/L
108,667/mL*

Maximum
Effluent

N/A
N/A

Average
Effluent

0.06 mg/L
45/mL

Minimum %
Reduction

N/A
N/A

Average %
Reduction

97%
99.96%

NSF Test
Number

994707
994711

Contaminant
Reduction

U.S. EPA
MCL

Average
Influent

Maximum
Effluent

Average
Effluent

Minimum %
Reduction

Average %
Reduction

NSF Test
Number

Cyst
Turbidity

99.95%**
N/A

157,750/mL
26 NTU

55/mL
0.5 NTU

1.0/mL
0.1 NTU

99.9987%
98.9%

99.9996%
99.5%

994710
994710

Lead: @ pH 6.5
Lead: @ pH 8.5

0.015 mg/L
0.015 mg/L

0.160 mg/L***
0.158 mg/L***

0.011 mg/L
0.011 mg/L

0.001 mg/L
0.001 mg/L

93.5%
92.1%

99.4%
99.3%

994708
994709

Tested and certified by NSF International against ANSI/NSF
Standard 42 for the reduction of Chlorine (Class I), Taste and Odor.

Tested and certified by NSF International against ANSI/NSF Standard
42 for the reduction of Chlorine (Class I) Taste and Odor and against
ANSI/NSF Standard 53 for the reduction of Lead, Cysts and Turbidity.

Water Supply
Water Pressure
Water Temperature

City or Well

30 - 120 psi (207 - 827 kPa)

33° - 100°F (0.6° - 37.8° C)

Advertising