Whirlpool 9762354A - Manuel (Page 14)

14
Sequence Programming
(on some models)
Sequence Programming allows you to program at one time up to
4 cooking functions. Other oven functions, such as the Timer and
Warming Drawer may be used when a sequenced Program is
running.
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step in the sequence
program, and the FIRST/NEXT STEP pad is pressed, 3 tones will
sound prompting you to enter a stop time.
Sequence Programming takes precedence over any
nonsequenced cooking function. For example, if an untimed
Bake function is in process and a sequence program is started,
the untimed Bake function will be canceled, and the program
sequence will start.
Example - Sequence Programming
To Program the First Step of the Sequence:
1. Press FIRST/NEXT STEP.
“PROGRAM” and “STEP” will appear on the display. A
flashing “1” will also appear on the display, indicating that
Step 1 is being programmed.
2. Press BAKE, or any other desired cooking function.
3. Press TEMP “up” or “down” arrow pad (if desired) to select a
temperature other than the one displayed.
4. Press START TIME, then HR and MIN “up” or “down” arrow
pads to set the time of day for the first cooking function to
begin. For example, 1:00.
If START TIME is not pressed, then the sequence of cooking
functions will begin immediately once programming is
complete and START is pressed.
The display will show either the time of day (if start time was
not programmed) or the start time (if same was programmed),
but with a flashing colon. “Stop” and “Time” will also appear
on the display.
5. Press STOP TIME, then HR and MIN “up” or “down” arrow
pads to set the time of day for the first cooking function to
stop. For example, 1:15.
To Program Next Steps (2 through 4) of the Sequence:
1. Press FIRST/NEXT STEP.
“PROGRAM” and “STEP” will appear on the display. The
number of the step being programmed will flash. “START”
and “TIME will also appear on the display.
2. Press Choice Bake ® , or any other desired cooking function.
3. Press TEMP “up” or “down” arrow pad (if desired) to select a
temperature other than the one displayed.
4. Press STOP TIME, then HR and MIN “up” or “down” arrow
pads to select a stop time. For example, 1:35.
5. Continue repeating steps 1 through 4 until the desired
number of sequences have been set. You can program up to
4 cooking functions within the sequence.
6. Press START to begin sequence.
If you choose to press START, your program sequence will
begin. Additional steps cannot be added to the sequence
once START has been pressed.
Press CANCEL at any time to clear program and to stop
program.
To Review/Modify Programmed Sequence:
If program steps are partially or completely programmed, yet the
sequence has not been started, the programmed cooking
functions can be reviewed.
1. Press REVIEW STEPS. Step 1 will appear in the display.
Subsequent presses of REVIEW STEPS will cause display of
programmed steps in order.
“STEP” and “RECALL” will appear on the display. The
number of the displayed step will flash. A recalled step will
remain lit on the display for 5 minutes if no further action is
taken.
2. If fewer than 4 steps have been programmed, press REVIEW
STEPS repeatedly until the last programmed step is
displayed, then press FIRST/NEXT STEP if it is desired to
program an additional step.
While a step is recalled, a cook function pad can be used to
change the function, or the TEMPERATURE “up” or “down”
arrow pad can be used to change the set temperature.
START TIME, when used with the HR or MIN “up” or “down”
arrow pads, can be used to change, add or delete a delayed
start.
STOP TIME can be used to change the stop time. Changing
the stop time of a step will automatically change the start
times and stop times of all subsequent programmed cook
functions.
3. After Review/Modification of the programmed sequence is
complete, press START to begin sequence.
To Modify Sequence Programming:
1. Press UNDO.
The last step of the sequence will be canceled, and the step
prior to the canceled sequence will show on the display for
either review or modification.
If the programmed sequence has not been started, see “To
Program Next Steps of the Sequence” section to program a
step to replace the canceled cook function.
2. Press START.
The first step will show on the display and the program
sequence will begin.
Changes can be made during a programmed cook function;
however, changes cannot be made after a programmed cook
function has been completed.
If at any time during an active sequenced program FIRST/
NEXT STEP is pressed, 3 tones will sound.