Tasco Digital Trail Camera 119215C - Manuel (Page 15)

15
VIEWING THE PHOTOS and VIDEOS
After your camera has been operating for awhile, you will of course want
to review the photos and/or videos it has been capturing. This can be
done by either of two methods, according to your preference or the
availability of accessory equipment:
using an SD Card Reader
Push the SD card in slightly to release it then pull it out gently.
Put the SD card into any of the widely available SD card readers (either
a dedicated SD card reader or “multi-card reader” that features slots for
several different memory cards, including SD cards.
Follow the card reader supplier’s directions to view or download the
photo and/or video files on the SD card.
Connect the Camera to PC directly
Slide the “Power” switch to the “On” position, then press the “SETUP”
button.
Connect your camera to a PC with the provided USB cable. The PC will
recognize the camera as an external storage device, using the “USB Mass
Storage” standard (no driver installation necessary-not compatible with
Windows 98 or earlier). The PC will display a new disk symbol under “My
Computer” or in Windows Explorer, and you will see a dialog window on
your desktop with several options to view, move, or copy the photo and
video files that are stored on the SD card. The camera’s LCD will display
“STO”, meaning the camera is in mass storage mode.