The Lenbrook Group T7150 - Manuel (Page 22)

Changing y
our Radio
’s Set
tings
21
• To start scanning, briefly press .
Your Channel/Code screen displays and begins to scroll through Channels.
When the radio detects channel activity, it stops on that channel and displays its
Channel and Code. You can talk to the person(s) transmitting without having to
switch Channels by pressing
.
• To stop scanning, briefly press .
If you press while the radio is scanning, the radio will transmit on the Channel
which was selected before you activated Scan.
If no transmission occurs within five seconds, scanning will resume.
Scan Manual Advance
If Scan stops on a Channel that you don’t want, briefly press to resume
scanning for the next active Channel in the Scan List.
Scan Nuisance Delete
If Scan continuously stops on an undesired Channel, hold press or key for 2
seconds. This will temporarily remove the undesired Channel from being scanned.
To restore the deleted Channel, turn Scan Off by pressing
, then turn Scan back
On by pressing again.
Note: Your Home Channel is the Channel your radio was set to when you activated
Scan. You cannot Nuisance Delete your Home Channel.