TeleAdapt KD-G722 - Manuel (Page 15)

15
ENGLISH
Sound adjustments
You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).
1
2
Indication (For)
BAS TRE LOUD
(bass) (treble) (loudness)
USER (Flat sound) 00 00 OFF
ROCK
(Rock or disco music)
+03 +01 ON
CLASSIC
(Classical music)
+01 –02 OFF
POPS (Light music) +04 +01 OFF
HIP HOP
(Funk or rap music)
+02 00 ON
JAZZ (Jazz music) +02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Preset values
Indication, [Range]
BAS* 1 (bass), [–06 to +06]
Adjust the bass.
TRE* 1 (treble), [–06 to +06]
Adjust the treble.
FAD* 2 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD* 1 (loudness), [LOUD ON or
LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at low volume level.
SUB.W* 3 (subwoofer), [00 to 08]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50* 4 ]
Adjust the volume.
* 1 When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”
* 2 If you are using a two-speaker system, set the
fader level to “00.”
* 3 This takes effect only when a subwoofer is
connected.
* 4 Depending on the amplifier gain control
setting. (See page 18 for details.)
Indication pattern changes
as you adjust the level.
Ex.: When “TRE” is selected
EN08-17_KD-G722_003A_f.indd 15 EN08-17_KD-G722_003A_f.indd 15 12/19/05 6:31:55 PM 12/19/05 6:31:55 PM