FoodSaver V2820 - Manuel (Page 5)

Ba
gs
&
Rolls
Accessories
How to Prepare FoodSaver
®
Accessories for Vacuum Packaging
FoodSaver
®
Accessories
Accessories include FoodSaver ® Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.
1. Always leave at least one inch of space between
contents and rim.
2. Wipe rim of canister, container or bottle to
ensure it is clean and dry.
3. Place lid on canister or container, or place
stopper in bottle.
4. For accessories with a large knob on lid,
turn knob to Vacuum.Vacuum package using
instructions below. When vacuum process is
complete, turn knob to Closed before removing
Accessory Hose
(A) .
5. For accessories without a large knob on lid,
vacuum package using instructions below.
How to Open FoodSaver
®
Accessories after Vacuum Packaging
FoodSaver ® Vacuum Packaging Canisters
(without large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
Quick Marinators (with large knob on lid)
and Universal Lids
To release vacuum and open, turn knob on lid
to Open.
FoodSaver ® Jar Sealer with Mason Jars
For use with Ball ® and Kerr
®
brand Mason jars.
To release vacuum and open, wedge spoon between
Mason jar lid and highest part of threaded rim.Twist
spoon gently to release vacuum.
IMPORTANT: Do NOT use screw bands when
vacuum packaging jars.
FoodSaver ® Bottle Stoppers
To release vacuum and open, simply pull up on
Bottle Stopper.
How to Vacuum Package with FoodSaver
®
Accessories
1. Prepare container according to FoodSaver
®
Accessory Guidelines above.
2. With lid closed, insert one end of Accessory
Hose
(A) into Port (O) on appliance. Insert other
end into port on accessory.Twist black
tab while inserting to ensure a tight fit.
3. Lock the Latch (E) on side of appliance
before vacuuming.
4. If vacuum packaging in a large canister, push
High Speed Setting
(P) Button.
5. Push the Canister Vacuum Button (Q) . Motor will
run until vacuum process is complete.
6. When motor turns off, gently twist and remove
Accessory Hose from accessory and appliance.
Unlock Latch.
7. To test vacuum, simply tug on accessory lid.
It should not move.
Note: For important tips on using accessories with
different foods, please refer to the FoodSaver ®
Reference Guide. Insert Accessory Hose into Port